Science and technics

Geology: Publications in Journal of Mining Institute.

Publications:

In Polish mining for backfilling the fly ash mixtures are used. Last time for fly ash mixtures preparation the saline water from mine have been used, to thanks to that the saline water missing the surface waters. Usage of saline water for fly ash mixture preparation causes the changes in energy looses during the flow in pipelines. The paper presents the results of energy looses measurement іn laboratory pipeline installation with diameter D =50 mm. The measurements have been performed for different fly ash – saline water proportions. Tested fly-ash from Siersza power plant has typical properties (grain size distribution curve, density) for ashes used for backfilling mixtures preparation. Increase of fluid (water) salinity modifies fluid viscosity. Brine in comparison with pure water retains as liquid with increased viscosity. Increased viscosity can influence on the mixture ash-brine properties for example causing flocculation effect. Also changeable salinity has an influence on proper determination of resistance (frictional) coefficient λ during mixtures flow in pipelines because it depends on Reynolds number which depends on liquid viscosity. Increase of fly-ash concentrations in fly-ash – brine mixtures cause increase of energy losses.

ExxonMobil became the first international sponsor of the 6th Future Leaders Forum of the World Petroleum Council. In accordance with the agreement signed by the company and the Russian National Committee of the World Petroleum Council, ExxonMobil has received the status of the LEADERSHIP Sponsor.

Publications: Vladimir Litvinenko, Mikhail Dvoinikov. Justification of the technological parameters choice for well drilling by rotary steerable systems

The article discusses the relevance and possibility of using the process approach in the development and implementation of occupational safety management systems based on GOST 12.0.230-2007, which is the main document in this area for all industrial enterprises and organisations of the Russian Federation. The system of occupational safety management in the organisation is considered taking into account all its internal communications and input-output parameters. It is shown that the process approach used in the design of the occupational safety management system in the organisation, allows categorising the list of works (processes), participants, resources (responsible, performers, documents, etc.), the control and correction processes. The methodological substantiation of the process approach to the design of the occupational safety management system in the organisation is given, the basic issues of its applicability are considered. A context diagram of the process of an occupational safety management system is drawn in the IDEF0 graphical notation by means of the SADT structural analysis technology. The decomposition of the context diagram to the required levels of detail is presented and the balance factor of the models is calculated.

The article analyses waste generation of pulp and paper industry in North-Western Russia. The environmental impact of waste storage facilities of the pulp and paper mill was assessed, the need for utilization of lignin sludge was justified. In North-Western Russia, 1.21 million hectares of disturbed areas are in need for reclamation; they are abandoned quarries and lands alienated for pipeline and road construction. The suitability of lignin sludge for preparation of artificial fertile soils for reclamation purposes is estimated. For this purpose, experiments were carried out to create an artificial mixture with different ratios of lignin sludge and soil, to detect the maldevelopment of several plant species grown on various compositions of lignin sludge and soils. It was revealed that lignin sludge as an organic additive to soils is not toxic to vegetation and living organisms, allowing improving fertility of artificial soils.

The article discusses the fields and methods of application of unmanned aerial vehicles (UAV). Current legislation in Russia and in the world, significantly limit the use of UAV in monitoring. For the first time, we present a solution to the problem of a monitoring measurement system included in the state register of measuring instruments using the example of the basic UAV model. We conducted an analysis of promising approaches to the creation of UAV metrological and methodological support, as well as ways to adapt their target load to meet the challenges of operational monitoring of air pollution.

The conditions for the occurrence of near bottom minerals presented in the form of sulphides (the Logachev deposit) and ferro-manganese nodules (The conditions for the occurrence of benthic minerals presented in the form of sulphides (the Logachev deposit) and ferro-manganese nodules (FMN) are considered. An analysis of the structures and parameters of various means of collecting and transporting sulphides and iron ore from the bottom to the surface is given, and the possibility of effectively using vessel lifting on a cable-rope is indicated. Structural schemes for collecting FMN and sulphides in the form of containers on a cable, equipped with manipulators with gripping devices of a disc, drum or clamshell type, are proposed. In them, the capture of rock pieces or FMN is carried out by creating a vacuum in the collectors of the executive bodies and attracting to them pieces of rock or FMN by a pressure drop of water inside and outside the reservoir. It was given the approximate parameters of the mining system. So, for a cable-rope made of kevlar with a diameter of 50 mm, the capacity can be 200-400 thousand tons per year for one installation with different specific mass concentration of FMN per 1 m2) are considered.

The possible options for the integration of telecommunications and electrical systems of mining enterprises are considered. Based on an analysis of the current state and prospects for the development of telecommunications systems, various technical solutions are proposed for sharing the power supply networks available in mines and underground structures in order to solve the problems of telecommunication, automate process control and ensure the safety of operations. The analysis of the possibilities of applying the PLC technology in underground structures and mines for solving specific telecommunication problems has been carried out, and examples of their possible technical and hardware implementation are given.